Where to buy schluter strips

Show Product Table. Reset Input. Product type profile. Find recommended accessories here. Show more. Set the adjacent row of tiles. Fill the joint completely with grout or setting material. Product Table preview. Warranties WallandCountertop-Profiles-Warranty. Brochures and Pamphlets Profile Brochure. Q: How do I cut profiles? Read more. PVC Plastic Zinc Stainless Steel V4A Brass Polyamid Magnet 1. Stainless Steel Satin Anodized Brushed Stainless Steel Bright White Matte White Black Classic Grey Sand Pebble White Polished Chrome Anodized Bahama Grey Light Beige Light Grey Matte Black Beige Greige Cream Dark Anthracite Ivory Light Anthracite Bronze Rustic Brown Stone Grey Pewter Satin Nickel Anodized Non-anodized Aluminum Brushed Antique Bronze Anodized Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion.

Avoid the use of strong acids e. Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Oxidation films on aluminum may be removed with a common polishing agent but will form again.

In the case of anodized aluminum and color-coated aluminum, do not use abrasive cleaning agents. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If the QUADEC profile is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall.

Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx.

Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum. Note: Matching corners and connectors are available. Corners are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. Connectors are held in place with a friction fit.